3com S7906E Guía De Referencia

 

1-14 

None 

Use the display ip relay-tunnel command to display recursive tunnel information. 

# Display recursive tunnel information. 

<Sysname> display ip relay-tunnel 

 Total Number of Relay-tunnel is: 1. 

 Dest/Mask: 40.40.40.40/255.255.255.255 

Related instance id(s): 1(1) 2(1) 3(1) 4(1) 

Table 1-5 display ip relay-tunnel command output description  

Total Number of Relay-tunnel 

Total number of recursive tunnels 

Dest/Mask Destination 

address/mask of the recursive tunnel 

Related instance id(s) 

The number in the parentheses after each instance ID 
indicates the number of routes that have used the recursive 
tunnel in the routing table corresponding to the instance ID.

 

display ipv6 routing-table 

Any view 

1: Monitor level 

None 

Use the display ipv6 routing-table command to display brief routing table information, including 

destination IP address and prefix, protocol type, priority, metric, next hop and outbound interface. 

The command displays only active routes, namely, the brief information about the current optimal 

routes. 

# Display brief routing table information 

<Sysname> display ipv6 routing-table 

Routing Table :