3com S7906E Guía De Referencia

 

1-5 

Silent interfaces 

Number of silent interfaces, which do not periodically 
send updates 

Default routes 

Indicates whether a default route is sent to RIP neighbors

z 

only means only a default route is advertised. 

z 

originate  means a default route is advertised along 
with other routes. 

z 

disable means no default route is advertised. 

Default route cost 

Cost of the default route 

Verify-source 

Indicates whether the source IP address is checked on 
the received RIP routing updates 

Networks 

Networks enabled with RIP 

Configured peers 

Configured neighbors 

Triggered updates sent 

Number of sent triggered updates 

Number of routes changes 

Number of changed routes in the database 

Number of replies to queries 

Number of RIP responses 

 

display rip process-id database 

Any view 

1: Monitor level 

process-id: RIP process ID, in the range of 1 to 65535.  

Use the display rip database command to display the active routes in the RIP database, which are 

sent in normal RIP routing updates. 

# Display the active routes in the database of RIP process 100. 

<Sysname> display rip 100 database 

   10.0.0.0/8, cost 6, ClassfulSumm 

   10.0.0.0/8, cost 6, nexthop 192.168.0.37 

   192.168.0.0/24, cost 0, ClassfulSumm 

   192.168.0.0/24, cost 0, nexthop 192.168.0.73, Rip-interface