3com S7906E Guía De Referencia

 

1-57 

Use the reset isis peer command to clear the data structure information of a specified IS-IS neighbor.  

This command is used when you need to re-establish an IS-IS neighbor relationship.  

# Clear the data structure information of the neighbor with the system ID 0000.0c11.1111.  

<Sysname> reset isis peer 0000.0c11.1111 

set-overload [ on-startup [ [ start-from-nbr system-id [ timeout1 [ nbr-timeout ] ] ] | timeout2 ] [ allow 

{ interlevel | external } * ] 

undo set-overload 

IS-IS view 

2: System level 

on-startup: Sets the overload bit upon system startup.  

start-from-nbr system-id: Starts the nbr-timeout timer when the router begins to establish the neighbor 

relationship with the neighbor. If the neighbor relationship is formed within the nbr-timeout interval, IS-IS 

keeps the overload bit set; if not, the bit is cleared. system-id specifies the neighbor. 

timeout1: IS-IS keeps the overload bit set within the timeout1 interval after the neighbor relationship is 

formed within the nbr-timeout interval. The timeout1 interval is in the range 5 to 86400 seconds and 

defaults to 600 seconds.  

nbr-timeout: The timer is started when the router begins to establish the neighbor relationship with the 

neighbor after system startup. The timer has an interval from 5 to 86400 seconds. The default is 1200 

seconds. 

timeout2: Sets the overload bit within the timeout2 interval after system startup. The interval is in the 

range 5 to 86400 seconds and defaults to 600 seconds. 

allow: Allows advertising address prefixes. By default, no address prefixes are allowed to be advertised 

when the overload bit is set.  

interlevel: Allows advertising IP address prefixes learnt from different IS-IS levels with the allow 

keyword specified.  

external: Allows advertising IP address prefixes redistributed from other routing protocols with the 

allow keyword specified.  

Use the set-overload command to set the overload bit.  

Use the undo set-overload command to clear the overload bit.