3com S7906E Guía De Referencia

 

1-46 

[Sysname-bgp-vpn1] peer test connect-interface loopback 0 

peer { group-name | ip-address } default-route-advertise [ route-policy route-policy-name ] 

undo peer { group-name | ip-address } default-route-advertise 

BGP view/BGP-VPN instance view  

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters. 

ip-address: IP address of a peer. 

route-policy-name: Routing policy name, a string of 1 to 19 characters. 

Use the peer default-route-advertise command to advertise a default route to a peer/peer group. 

Use the undo peer default-route-advertise command to disable default route advertisement to a 

peer/peer group. 

By default, no default route is advertised to a peer/peer group. 

With this command used, the router unconditionally sends a default route with the next hop being itself 

to the peer/peer group regardless of whether the default route is available in the routing table. 

# In BGP view, advertise a default route to peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer test default-route-advertise 

# In BGP-VPN instance view, advertise a default route to peer group test (the VPN has been created). 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] peer test default-route-advertise 

peer { group-name | ip-address } description description-text 

undo peer { group-name | ip-address } description