3com S7906E Guía De Referencia

 

1-60 

reconnect reconnect-time: Specifies a reconnect time, after which, the router will re-establish a 

connection to the peer/peer group. It has no default value and is in the range 1 to 65535 seconds. 

percentage-value: Threshold value for the router to display an alarm message (that is, the router 

displays an alarm message when the ratio of the number of received prefixes to the prefix-number 

reaches the percentage). It is in the range 1 to 100 and defaults to 75. 

Use the peer route-limit command to set the number of route prefixes that can be received from a 

peer/peer group.  

Use the undo peer route-limit command to restore the default.  

The number is not limited by default. 

# In BGP view, set the number of route prefixes that can be received from peer 129.140.6.6 to 10000.  

<Sysname> system-view 

[Sysname] bgp 109 

[Sysname-bgp] peer 129.140.6.6 as-number 110 

[Sysname-bgp] peer 129.140.6.6 route-limit 10000 

# In BGP-VPN instance view, set the number of route prefixes that can be received from peer 

129.140.6.6 to 10000 (the VPN has been created). 

<Sysname> system-view 

[Sysname] bgp 109 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] peer 129.140.6.6 as-number 110 

[Sysname-bgp-vpn1] peer 129.140.6.6 route-limit 10000 

peer { group-name | ip-address } route-policy route-policy-name { export | import } 

undo peer { group-name | ip-address } route-policy route-policy-name { export | import } 

BGP view/BGP-VPN instance view  

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters. 

ip-address: IP address of a peer. 

route-policy-name: Routing policy name, a string of 1 to 19 characters. 

export: Applies the routing policy to routes outgoing to the peer (or peer group). 

import: Applies the routing policy to routes incoming from the peer (or peer group).