3com S7906E Guía De Referencia
1-6
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] default-route-advertise always
display ospfv3
Syntax
display ospfv3 [ process-id ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: Specifies the ID of an OSPFv3 process, ranging from 1 to 65535.
Description
Use the display ospfv3 command to display the brief information of an OSPFv3 process. If no process
ID is specified, OSPFv3 brief information about all processes will be displayed.
Examples
# Display brief information about all OSPFv3 processes.
<Sysname> display ospfv3
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
SPF schedule delay 5 secs, Hold time between SPFs 10 secs
Minimum LSA interval 5 secs, Minimum LSA arrival 1 secs
Number of external LSA 0. These external LSAs’ checksum Sum 0x0000
Number of AS-Scoped Unknown LSA 0
Number of LSA originated 3
Number of LSA received 0
Number of areas in this router is 1
Area 0.0.0.1
Number of interfaces in this area is 1
SPF algorithm executed 1 times
Number of LSA 2. These LSAs’ checksum Sum 0x20C8
Number of Unknown LSA 0
Table 1-1 display ospfv3 command output description
Field
Description
Routing Process "OSPFv3 (1)" with ID 1.1.1.1
OSPFv3 process is 1, and router ID is 1.1.1.1.
SPF schedule delay
Delay interval of SPF calculation
Hold time between SPFs
Hold time between SPF calculations
Minimum LSA interval
Minimum interval for generating LSAs
Minimum LSA arrival
Minimum LSA repeat arrival interval