3com S7906E Guía De Referencia

 

1-14 

Trap 

State of trap messages sending. “on” indicates trap message sending is 
enabled; “off” indicates trap message sending is disabled. 

Log 

State of log sending. “on” indicates log sending is enabled; “off” indicates 
log sending is disabled. 

Swi-num 

Number of the forwarding state switching. 

This field is numbered modulo 65,535. 

 

duplex { auto | full | half } 

undo duplex 

Ethernet interface view 

2: System level 

auto: Indicates that the interface is in auto-negotiation state. 

full: Indicates that the interface is in full-duplex state. 

half: Indicates that the interface is in half-duplex state. The optical interface of a Combo port does not 

support the half keyword.  

Use the duplex command to configure the duplex mode for an Ethernet interface. 

Use the undo duplex command to restore the duplex mode for an Ethernet interface to the default. 

By default, the duplex mode for an Ethernet interface is auto. 

Related commands: speed. 

# Configure the interface Ethernet 2/0/1 to work in full-duplex mode. 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] duplex full