3com S7906E Guía De Referencia

 

1-36 

seconds: Transmission delay in seconds, ranging from 1 to 3600.  

instance-id: Instance ID of an interface, in the range of 0 to 255, with the default as 0.  

Use the ospfv3 trans-delay command to configure the transmission delay for an interface with an 

instance ID.  

Use the undo ospfv3 trans-delay command to restore the default.  

The transmission delay defaults to 1s. 

As LSAs are aged in the LSDB (incremented by 1 every second) but not aged on transmission, it is 

necessary to add a delay time to the age time before sending a LSA. This configuration is important for 

low-speed networks. 

 

Currently, the S7900E series Ethernet switches do not support configuring the ospfv3 trans-delay 

command on a loopback interface. 

 

# Configure the transmission delay as 3 seconds for an interface in instance 1. 

<Sysname> system-view 

[Sysname] interface vlan-interface 10 

[Sysname-Vlan-interface10] ospfv3 trans-delay 3 instance 1 

preference [ ase ] [ route-policy route-policy-name ] preference 

undo preference [ ase ] 

OSPFv3 view 

2: System level 

ase: Applies the preference to OSPFv3 external routes. If the keyword is not specified, the preference 

applies to OSPFv3 internal routes. 

route-policy route-policy-name: References a routing policy to set preference for specific routes. The 

name is a string of 1 to 19 characters. 

Preference: Preference of OSPFv3, in the range 1 to 255.