3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
68
C
HAPTER
7: U
SER
I
NTERFACE
C
ONFIGURATION
Configuring user interface locking function
This configuration is used to lock the current terminal line and remind you to enter
the password, in case any other person operates on the terminal line without your
presence.
the password, in case any other person operates on the terminal line without your
presence.
For example, you have accessed the router via VTY1, and you lock the
user-interface vty 1 now because you will leave for a while.
user-interface vty 1 now because you will leave for a while.
[3Com]lock
Password:
Again:
Setting screen-length of terminal screen
By default, the full screen-length of terminal screen is 24 lines.
■
screen-length 0
disables screen split.
■
undo screen-length
restores the default setting.
Setting the size of the history command buffer
The parameter
size-value
is the history command buffer size which defaults to
10, that is, the buffer is allowed to restore a maximum of ten history commands.
Configuring Modem
Attributes
In the event of dial-in via a modem into an asynchronous interface, you can
manage and configure the modem-concerned parameters in user interface view.
You should note that the configuration commands in this case are only valid for
the AUX interface and the serial interfaces working in asynchronous mode.
manage and configure the modem-concerned parameters in user interface view.
You should note that the configuration commands in this case are only valid for
the AUX interface and the serial interfaces working in asynchronous mode.
Table 62 Configuring user interface locking function
Operation
Command
Lock user interface
lock
Table 63 Setting screen-length of terminal screen
Operation
Command
Set screen-length of terminal screen
screen-length screen-length
Restore the default screen-length of terminal screen
undo screen-length
Table 64 Setting the size of the buffer for the history command
Operation
Command
Set the size of the buffer for the history
commands
commands
history-command max-size size-value
Restore the default size of the buffer for
the history commands
the history commands
undo history-command max-size
Table 65 Making modem configurations
Operation
Command
Set the time interval that the system waits for the
CD_UP signal after receiving the RING signal
CD_UP signal after receiving the RING signal
modem timer answer seconds