3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
84
C
HAPTER
9: NTP C
ONFIGURATION
the server which provides reliable key. Otherwise, the client will not be
synchronized to the server.
synchronized to the server.
Perform the following in the System View.
Setting NTP
Authentication Key
The following configuration is used to set NTP authentication key.
Perform the following in the System View.
The range of the key number is 1 to 4294967295. The key value is 1 to 32 ASCII
characters.
characters.
Setting the Specified
Key to Be Reliable
The following configuration is used to declare or deny that the key is reliable.
Perform the following in the System View.
The range of the key number is 1 to 4294967295.
Setting the Interface for
the Local to Transmit
NTP Messages
When specifying the local to transmit all the NTP messages, the source IP
addresses in all the packets use only one specified IP address, which is obtained
from the specified interface.
addresses in all the packets use only one specified IP address, which is obtained
from the specified interface.
Perform the following in the System View.
Table 85 Configuring NTP ID authentication
Operation
Command
Enable NTP ID authentication
ntp-service authentication enable
Disable NTP ID authentication
undo ntp-service authentication enable
Table 86 Configuring NTP authentication key
Operation
Command
Set NTP authentication key
ntp-service authentication-keyid number
authentication-mode md5 value
authentication-mode md5 value
Remove NTP authentication key
undo ntp-service authentication-keyid
number
number
Table 87 Setting the specified key to be reliable
Operation
Command
Specify the key to be reliable
ntp-service reliable authentication-keyid
key-number
key-number
Remove the specified reliable key
undo ntp-service reliable
authentication-keyid key-number
authentication-keyid key-number
Table 88 Setting the interface for the local to transmit NTP messages
Operation
Command
Set the interface for the local to transmit
NTP messages
NTP messages
ntp-service source-interface {
interface-name | interface-type
interface-number }
interface-name | interface-type
interface-number }