3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
92
C
HAPTER
9: NTP C
ONFIGURATION
[Router3]ntp-service reliable authentication-keyid 88
e Enter the interface Ethernet1/0/0 view.
[Router4]interface ethernet 1/0/0
f
Set the local router as NTP broadcast Client.
[Router4-Ethernet1/0/0]ntp-service broadcast-client
In the above configuration, Router4 is configured to listen to broadcast messages
from Ethernet1/0/0 and Router3 is configured to transmit broadcast packets from
Ethernet1/0/0. Router4 is synchronized with Router3 after receiving the broadcast
packets transmitted by Router3.
from Ethernet1/0/0 and Router3 is configured to transmit broadcast packets from
Ethernet1/0/0. Router4 is synchronized with Router3 after receiving the broadcast
packets transmitted by Router3.
The state of Router4 after synchronization includes:
<Router4>display ntp-service status
clock status: synchronized
clock stratum: 4
reference clock ID: 3.0.1.31
nominal frequency: 250.0000 Hz
actual frequency: 249.9992 Hz
clock precision: 2^19
clock offset: 198.7425 ms
root delay : 27.47 ms
root disper: 208.39 ms
peer disper: 9.63 ms
reference time: 17:03:32.022 UTC Sep 6 2003(BF422AE4.05AEA86C)
Now Router4 is synchronized with Router3. Its stratum number is 4, which is 1
number larger than that of Router3.
number larger than that of Router3.
Configuring NTP
Multicast Mode
Networking requirements
Router3 sets the local clock as the NTP master clock and the stratum number is 2.
It transmits multicast packets from Ethernet 1/0/0. Router4 and Router1 are set to
listen to the multicast message from their interfaces respectively.
It transmits multicast packets from Ethernet 1/0/0. Router4 and Router1 are set to
listen to the multicast message from their interfaces respectively.
Networking diagram
See Figure 16.
Configuration procedure
1 Configure Router3
a Enter the system view.
<Router3>system-view
b Set the local clock as the NTP master clock and the stratum number is 2.
[Router3]ntp-service refclock-master 2
c Enter the interface Ethernet 1/0/0 view.
[Router3]interface ethernet 1/0/0
d Set the multicast server.
[Router3-Ethernet1/0/0] ntp-service multicast-server
2 Configure Router4
a Enter the system view.