3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
202
C
HAPTER
17: PPP
AND
MP C
ONFIGURATION
By default, the system performs bundle according to the authenticated username
and terminal identifier simultaneously.
and terminal identifier simultaneously.
After the configurations above, the basic MP configuration is finished. The user
can configure other MP optional parameters up to real need.
can configure other MP optional parameters up to real need.
Configuring Maximum
Number of MP Bundled
Links
Perform the following configuration in virtual-template view.
By default, the maximum number of bundled links is 16.
Setting the Minimum
Outgoing MP Packet
Fragment Size
Perform the following configuration in virtual-template view.
By default, the minimum packet size for MP packet to fragment is 128.
Configuring Callback
Configuring callback
Perform the following configuration in interface view.
The interface cannot serve as server and client at the same time.
By default, callback is not configured.
Configuring the dialing string needed during router callback
Perform the following configuration in interface view.
Bundle according to authenticated
username
username
ppp mp binding-mode authentication
Bundle according to the terminal identifier
ppp mp binding-mode descriptor
Bundle according to both the username and
terminal identifier
terminal identifier
ppp mp binding-mode both
Restore the default bundle mode
undo ppp mp binding-mode
Table 270 Performing bundling by username or terminal identifier
Table 271 Configuring maximum number of MP bundled links
Operation
Command
Configure maximum number of MP bundled links
ppp mp max-bind max-bind-num
Restore the default configuration
undo ppp mp max-bind
Table 272 Setting the minimum outgoing MP packet fragment size
Operation
Command
Set the minimum packet size for MP outgoing packet to
fragmentate
fragmentate
ppp mp min-fragment size
Restore the default setting
undo ppp mp min-fragment
Table 273 Configuring callback function
Operation
Command
Configure an interface as a callback
server or client
server or client
ppp callback { client | server }
Disable to configure an interface as a
callback server or client
callback server or client
undo ppp callback { client | server }