3com 3031 Instruccion De Instalación
Typical Configuration Example of PPPoEoA
217
Typical Configuration
Example of PPPoEoA
Example of PPPoEoA
Configuration requirements
In Figure 38, the hosts access the Internet via the router by making use of PPPoE.
Networking diagram
Router is connected to the Ethernet through the interface Ethernet 1/0/0 and the
Internet through Serial3/0/0.
Internet through Serial3/0/0.
Figure 38 PPPoE networking diagram
Configuration procedure
1 Add a PPPoE user
[router]local-user NE password simple 3Com
2 Configure PPPoE parameters on 3Com:
[router]interface ethernet 1/0/0
[router-Ethernet1/0/0]pppoe-server bind virtual-template 1
3 Configure virtual-template parameters on 3Com:
[router]interface virtual-template 1
[router-Virtual-Template1]ppp authentication-mode chap
[router-Virtual-Template1]ppp chap user 3Com
[router-Virtual-Template1]remote-address pool 1
[router-Virtual-Template1]ip address 1.1.1.1 255.0.0.0
4 Add a local IP address pool containing nine IP addresses.
[router]ip pool 1 1.1.1.2 1.1.1.10
When installed with PPPoE client software and configured with user name and
password (herein as NE and 3Com respectively), every host on the Ethernet can
access the Internet through the router with PPPoE.
password (herein as NE and 3Com respectively), every host on the Ethernet can
access the Internet through the router with PPPoE.
When configured with the parameters above, the 3Com router may also be
configured with AAA/RADIUS parameters, thus enabling the system to charge. For
detailed configuration procedures, please refer to the Part IX “Security”.
configured with AAA/RADIUS parameters, thus enabling the system to charge. For
detailed configuration procedures, please refer to the Part IX “Security”.
Internet
Host
Host
Router