3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
Typical ATM Configuration Examples
279
b Establish a PVC with IP running.
[3Com-atm1/0/0]pvc to_b 0/40
[3Com-atm-pvc-atm1/0/0-0/40-to_b]map ip 202.38.160.2
[3Com-atm-pvc-atm1/0/0-0/40-to_b]quit
[3Com-atm1/0/0]pvc to_c 0/41
[3Com-atm-pvc-atm1/0/0-0/41-to_c]map ip 202.38.160.3
2 Configure Router B
a Enter the ATM interface (also ATM 1/0/0 as shown in the figure), and configure
an IP address for it.
<3Com>system-view
[3Com]interface atm 1/0/0
[3Com-atm1/0/0]ip address 202.38.160.2 255.255.255.0
b Establish a PVC with IP running.
[3Com-atm1/0/0] pvc to_a 0/50
[3Com-atm-pvc-atm1/0/0-0/50-to_a] map ip 202.38.160.1
[3Com-atm-pvc-atm1/0/0-0/50-to_a] quit
[3Com-atm1/0/0] pvc to_c 0/51
[3Com-atm-pvc-atm1/0/0-0/51-to_c] map ip 202.38.160.3
3 Configure Router C
a Enter the ATM interface (also ATM 1/0/0 as shown in the figure), and configure
an IP address for it.
<3Com>system-view
[3Com]interface atm 1/0/0
[3Com-atm1/0/0]ip address 202.38.160.3 255.255.255.0
b Establish a PVC with IP running.
[3Com-atm1/0/0]pvc to_a 0/60
[3Com-atm-pvc-atm1/0/0-0/60-to_a]map ip 202.38.160.1
[3Com-atm-pvc-atm1/0/0-0/60-to_a]quit
[3Com-atm1/0/0]pvc to_b 0/61
[3Com-atm-pvc-atm1/0/0-0/61-to_b]map ip 202.38.160.2
Typical IPoEoA
Configuration Example
Networking requirements
As shown in the following figure, each of the hosts in the two Ethernets is
respectively connected to the ATM network through an ADSL Router, and they
communicate with the router via DSLAM. The requirements are:
respectively connected to the ATM network through an ADSL Router, and they
communicate with the router via DSLAM. The requirements are:
■
The IP address of the VE (Virtual Ethernet) interface of the router is
202.38.160.1;
202.38.160.1;
■
The VPI/VCI addresses of two PVCs connecting to routers with DSLAM are 0/60
and 0/61, pointing to ADSL Router A and ADSL Router B respectively.
and 0/61, pointing to ADSL Router A and ADSL Router B respectively.
■
The DSL interfaces of the router's WAN port and ADSL Router all adopts
IPoEoA.
IPoEoA.