3com 3031 Instruccion De Instalación
280
C
HAPTER
25: ATM C
ONFIGURATION
Networking diagram
Figure 57 Networking diagram of IPoEoA configuration
Configuration procedure
1 Configure the router:
a Create a VE interface and configure an IP address for it.
[3Com]interface virtual-ethernet 1/0/0
[3Com-Virtual-Ethernet1/1/0]ip address 202.38.160.1 255.255.255.0
[3Com-Virtual-Ethernet1/1/0]quit
b Create a PVC and specify it to support IPoE.
[3Com]interface atm 1/0/0.1
[3Com-atm1/0/0.1]pvc to_adsl_a 0/60
[3Com-atm-pvc-atm1/0/0.1-0/60-to_adsl_a]map bridge
virtual-ethernet1/0/0
[3Com-atm-pvc-atm1/0/0.1-0/60-to_adsl_a]quit
[3Com-atm1/0/0.1]pvc to_adsl_b 0/61
[3Com-pvc-atm1/0/0.1-0/61-to_adsl_b]map bridge virtual-ethernet1/0/0
Typical PPPoA
Configuration Example
Networking requirements
As shown in Figure 58, two hosts dial into ATM network through ADSL Router
respectively, and communicate with the router through DSLAM. The requirements
are:
respectively, and communicate with the router through DSLAM. The requirements
are:
■
To establish the virtual template for multiple users on the router, and configure
the PPP map on the virtual template.
the PPP map on the virtual template.
■
The VPI/VCI addresses of two PVCs connecting routers with DSLAM are 0/60
and 0/61, pointing to ADSL Router A and ADSL Router B respectively.
and 0/61, pointing to ADSL Router A and ADSL Router B respectively.
■
’s DSL interface use PPPoA application mode, and they use PAP to authenticate
ADSL Router. The IP address of ADSL Router is provided by the remote AAA
server on the other side of the router (not included in the following figure).
ADSL Router. The IP address of ADSL Router is provided by the remote AAA
server on the other side of the router (not included in the following figure).
Server
Server
Workstation
Workstation
Workstation
Et
her
net
Et
her
net
IP: 202.38.160.1
To ADSL Router A: 0/60
To ADSL Router B: 0/61
Interface:Virtual-ethernet1/0/0
Router
ADSL Router A
ADSL Router B
DSLAM