3com 3031 Instruccion De Instalación

3Com Router A and B are connected by a serial interface through an IPX network. 
The node address of Ethernet interface of 3Com Router A is 00e0-fc01-0000 and 
that of 3Com Router B is 00e0-fc01-0001.

Here, Server is installed with NetWare 4.1 and its network ID is 2. Packet 
encapsulation format is Ethernet_II. Client is the user PC and its network ID is 3. 
Packet encapsulation format is SNAP. Server provides file services and directory 
services. Client can access these services through IPX network. The node of Server 
is 0000-0c91-f61f.

Figure 116   Networking diagram of IPX configuration example

1 Configure 3Com Router A:

a Activate IPX.

[3Com]ipx enable

b Activate IPX on the interface Ethernet2/0/0, with the network ID being 2.

[3Com]interface ethernet 2/0/0

[3Com-Ethernet2/0/0]ipx network 2

c Set the packet encapsulation format on Ethernet interface to Ethernet_II.

[3Com-Ethernet2/0/0]ipx encapsulation ethernet-2

[3Com-Ethernet2/0/0]quit

d Activate IPX on the interface Serial1/0/0, with the network ID being 1000.

[3Com]interface serial 1/0/0

[3Com-Serial1/0/0]ipx network 1000

[3Com-Serial1/0/0]quit

e Configure a static route to network ID 3

[3Com]ipx route-static 3 1001.00e0-fc01-0001 tick 7 hop 2

2 Configure 3Com Router B:

 

hub

Router A

Ethernet2/0/0

2.e0-fc01-0

Serial1/0/0

1000.e0-fc01-0

Router B

Serial1/0/0

1001.e0-fc01-1

client

server

IPX

 

hub

Ethernet2/0/0

3.e0-fc01-0001