3com 3031 Instruccion De Instalación
Setting Up a Configuration Environment
13
Figure 5 Setting the port communications parameters
3 The Router performs POST (Power-On Self-Test), and the system automatically
makes the configurations and prompt the user to press <Enter> upon the
completion of POST until the command line OS prompt (such as <3Com>)
appears.
completion of POST until the command line OS prompt (such as <3Com>)
appears.
4 Enter the command to configure the Router or view its running state and enter
"?” whenever you need help. For more information about commands, see the
chapters coming later.
chapters coming later.
Setup via Telnet
If the Router is not powered on for the first time and if you have correctly made
the configuration of IP address of each interface login authentication mode, and
the incoming and outgoing call restriction rules on the Router, you can make use
of Telnet to access the Router for configuration through the LAN or WAN as long
as there is a reachable route between the configuration terminal and the Router.
the configuration of IP address of each interface login authentication mode, and
the incoming and outgoing call restriction rules on the Router, you can make use
of Telnet to access the Router for configuration through the LAN or WAN as long
as there is a reachable route between the configuration terminal and the Router.