3com 3031 Instruccion De Instalación
CLI (Command Line Interface)
17
Figure 12 Dial on remote computer
3 Enter the correct username and password, and you can proceed to configure or
manage the Router once you see the command line DOS prompt (<3Com> for
example) displayed in the remote terminal emulation program.
example) displayed in the remote terminal emulation program.
Setup via SSH
SSH is only available through Extended V2.00 software.
SSH, secure shell, provides high level of security and authentication, protecting
3Com Series Routers from such attacks as IP address spoofing, plain-text password
interception, when subscribers log on the routers remotely from an insecure
network environment. The procedure is similar to that for Telnet mode.
3Com Series Routers from such attacks as IP address spoofing, plain-text password
interception, when subscribers log on the routers remotely from an insecure
network environment. The procedure is similar to that for Telnet mode.
1 To set up local configuration environment, connect the Ethernet port of PC to the
counterpart on the router. You can achieve network-layer interconnection via HUB
or an Ethernet switch. To set up remote configuration environment, you need set
up connection between them over WAN.
or an Ethernet switch. To set up remote configuration environment, you need set
up connection between them over WAN.
2 Run Telnet program on the PC. Configure terminal type as VT100 and key in the IP
address of the router (or enter the WAN interface IP address of the router on the
remote PC), to create connection with the router.
remote PC), to create connection with the router.
3 Configure SSH parameters on the router.
CLI (Command Line
Interface)
Interface)
The system provides the users with a series of configuration commands and CLI
through which the users can configure and manage their routers. The CLI offers
the following features:
through which the users can configure and manage their routers. The CLI offers
the following features: