3com 3031 Instruccion De Instalación
48
C
HAPTER
5: S
YSTEM
M
ANAGEMENT
M
AINTENANCE
■
Severity:
There are 8 levels in terms of the severity of the level, from 1 to 8.
For the definition and description, refer to Table 28.
There is a slash (/) between severity and digest.
■
Digest:
The digest is abbreviation, representing the abstract of contents.
There is a colon between digest and content.
■
Log host:
The system can set up to 4 log hosts at most. By default, the logs
are sent out to the log host through loghost (Tunnel 2). The command
info-center loghost
is used to set the log host.
The source IP address of the log can be set to the address of a fixed interface. In
this way, the log host can be used to perform the classification management for
the log through the source address. For example, the
this way, the log host can be used to perform the classification management for
the log through the source address. For example, the
info-center loghost
source loopback0
command can be used to set the source addresses of the logs
sent by the system are all the address of loopback0 interface.
Displaying and
Debugging Information
Center
After the above configuration, execute the
display
command in any view to
display the running of the information center after configuration, and to verify the
effect of the configuration.
effect of the configuration.
Execute the
debugging
command in user view for the debugging of the
information center.
Information Center
Configuration Example
Console information output
1 Enable the info-center.
[3Com]info-center enable
2 Configure Console log output, permitting the log output of PPP module and
setting the severity level to be in the range of emergencies to debugging.
[3Com]info-center console channel console
[3Com]info-center source ppp channel console log level debugging
3 Enable debugging of the PPP module.
<3Com>debugging ppp all
Outputting log information to the loghost (UNIX workstation)
1 Configure the router
a Enable the info-center
[3Com]info-center enable
Table 34 Displaying and debug information center
Operation
Command
Display information in the information
center
center
display info-center
Display information in log buffer
display logbuffer [ size sizeval ]
Display information in the log file buffer
display logfile buffer
Display information in trap buffer
display trapbuffer