3com 3031 Instruccion De Instalación
50
C
HAPTER
5: S
YSTEM
M
ANAGEMENT
M
AINTENANCE
this may lower the system performance. Therefore, it is not recommended to set
the log information level to debugging in normal circumstances.
the log information level to debugging in normal circumstances.
For the purpose of filtering, you can sort the information taking into account the
facilities, severities, filters, and the syslog.conf files.
facilities, severities, filters, and the syslog.conf files.
Displaying and
Debugging—Router
6000 Series
The device operating management includes monitoring the running status of the
device and configuring the parameters for the device. In terms of function, the
management includes:
device and configuring the parameters for the device. In terms of function, the
management includes:
■
Display the device initialization information and the essential running
information.
information.
■
Display and reset alarm and status information of the device.
■
Reboot the device and set the default boot file.
Displaying device
Perform the following operations in any view.
Resetting device
Perform the following in the User View.
Configuring device
Perform the following in the System View.
Table 35 Displaying device
Operation
Command
Display the basic information of the device
display device slot-number
Display the environment information
display environment
Display alarm and state information for the
device
device
display alarm urgent [ time |
slot | id ]
slot | id ]
Display parameter setting for scheduled
rebooting
rebooting
display schedule reboot
Table 36 Reset device
Operation
Command
Clear all the stored alarm information
reset alarm urgent
Table 37 Configuring device
Operation
Command
Upgrade a file in an in-service way
upgrade [ bootrom | pico-code |
logic ] filename
logic ] filename
Enable scheduled rebooting on the router
and set rebooting date and time
and set rebooting date and time
schedule reboot at hh:mm [
yyyy/mm/dd ]
yyyy/mm/dd ]
Enable scheduled rebooting on the router
and set delay value
and set delay value
schedule reboot delay { hhh:mm |
mmm }
mmm }
Remove parameter setting for scheduled
rebooting
rebooting
undo schedule reboot