3com 3031 Instruccion De Instalación
![3com](https://files.manualsbrain.com/attachments/960452ff43b9899cbcffced60c87abf956e7967a/common/fit/150/50/f6ac125d7af2cf40fec58935fa6d4bf71457a57efe50bee91208a434f325/brand_logo.jpeg)
FTP Configuration
55
Normal:
The FTP server writes the data to the flash memory during the file
transfer. This means that the occurrence of some abnormal conditions such as
power failure might cause the damage of the files in the flash memory of the
Router. But the normal updating mode consumes less memory.
power failure might cause the damage of the files in the flash memory of the
Router. But the normal updating mode consumes less memory.
Perform the following in the System View.
The updating mode of FTP server defaults to
fast
.
Configuring the timeout parameter
In order to safeguard against the illegal access from unauthorized users, the
connection with a FTP client will be disconnected if no service request from the
client has been received for a certain period of time.
connection with a FTP client will be disconnected if no service request from the
client has been received for a certain period of time.
Perform the following in the System View.
For example, configure the timeout of the FTP server to 20 minutes.
[3Com]ftp timeout 20
Displaying and
Debugging
After the above configuration, execute the
display
command in any view to
display the running of the FTP server after configuration, and to verify the effect of
the configuration.
the configuration.
The
display ftp-server
command will display the configuration of the current
FTP server, including maximum number of users that the server can support and
timeout. The
timeout. The
display ftp-user
command will display the specific information of
log-on FTP users.
Introduction to FTP
Client
FTP Client is an additional function of the router system available for the users. It
provides no configuration function and is an application module. The user can
connect to a remote server as an FTP client and enter FTP client commands to
perform corresponding operations, for example, to create or delete a directory.
provides no configuration function and is an application module. The user can
connect to a remote server as an FTP client and enter FTP client commands to
perform corresponding operations, for example, to create or delete a directory.
Table 45 Configuring the update of the FTP server
Operation
Command
Configure the update of the FTP server
ftp update { fast | normal }
Restore the update of the FTP server to the
default value
default value
undo ftp update { fast | normal }
Table 46 Configuring the timeout of the FTP server
Operation
Command
Configure the timeout of the FTP server
ftp timeout minute
Restore the timeout of the FTP server to the default value
undo ftp timeout
Table 47 Commands for monitoring and maintaining the FTP server
Operation
Command
Display the FTP server
display ftp-server
Display log-on FTP users
display ftp-user