3com 3031 Instruccion De Instalación
Displaying and Debugging L2TP
897
When using the
remote-name
parameter to specify the tunnel names to be
deleted, the system will delete all the tunnels with this name. When the
tunnel-id
parameter is specified, only the specified tunnel will be deleted.
Enabling/Disabling Flow
Control Function of the
Tunnel
This configuration can enable/disable a simple flow control function on the tunnel.
These configurations are optional on LAC side.
Perform the following in the L2TP Group View.
By default, the flow control function of Tunnel is disabled.
Displaying and
Debugging L2TP
Debugging L2TP
After the above configuration, execute
display
command in all views to display
the running of the L2TP configuration, and to verify the effect of the
configuration. The
configuration. The
debugging
command can be used in user view.Displaying and
debugging L2TP
Typical Configuration
Examples of L2TP
Examples of L2TP
L2TP call can be initialized either by a NAS (Network Access Server) or user end.
Only a client-initialized example is provided below.
Only a client-initialized example is provided below.
Client-Initialized VPN
Networking request
VPN users access company headquarters following the procedure below:
VPN users first connect to Internet, then originate Tunnel connection request to
LNS. After LNS has accepted the request, a virtual Tunnel is established between
LNS and VPN users to fulfill data transmission between the users and the company
headquarters.
LNS. After LNS has accepted the request, a virtual Tunnel is established between
LNS and VPN users to fulfill data transmission between the users and the company
headquarters.
Table 971 Enabling/Disabling flow control function of the tunnel
Operation
Command
Enable flow control function of Tunnel
tunnel flow-control
Disable flow control function of Tunnel
undo tunnel flow-control
Table 972 Displaying and debugging L2TP
Operation
Command
Show current L2TP Tunnel information
display l2tp tunnel
Show current L2TP session information
display l2tp session
Enable all L2TP information debugging
debugging l2tp all
Enable control packet debugging
debugging l2tp control
Enable PPP packet debugging
debugging l2tp dump
Enable L2TP error debugging
debugging l2tp error
Enable L2TP event debugging
debugging l2tp event
Enable hidden AVP debugging
debugging l2tp hidden
Enable L2TP payload debugging
debugging l2tp payload
Enable L2TP time stamp debugging
debugging l2tp time-stamp