3com 3031 Instruccion De Instalación

The source address of a Tunnel interface refers to its physical interface address. 
The source address and destination address can uniquely identify a tunnel. The 
interface source address should be configured at both the server and client. The 
source and destination addresses at the client serve respectively as the destination 
and source addresses at the server. 

Perform the following in the Tunnel Interface View.

This command is only available at the client. When dvpn-class attributes of the 
server are configured in the dvpn-class view at the client, you can use this 
command to use the dvpn-class configured. 

Perform the following in the Tunnel Interface View

With this command, you can configure UDP port for a Tunnel interface at server. 
The command is only available for UDP DVPN encapsulation mode. 

Perform the following in the Tunnel Interface View

The following configures are optional and the default values are often 
recommended. 

Perform the following in the Tunnel Interface View.

Table 984   Configuring source address

Configure source address 

 X.X.X.X | interfacename }

Delete source address 

Table 985   Configuring dvpn-class name for interface

Configure dvpn-class name for interface

dvpn server dvpn-class-name 

Delete the dvpn-class configured 

Table 986   Configuring UDP port for interface

Configure UDP port for interface

Delete the UDP port configured 

Table 987   Configuring timers

Configure map age_timer

Restore the default value of map age_timer

Configuring idle_timer

Restore the default value of idle_timer

Configuring map keepalive_timer 

time-interval