3com 3031 Instruccion De Instalación

The commands 

and 

 cannot be used together.

Set the following in the Interface View.

To restrict the speed of outward data via physical port, perform the following in 
the Interface View. 

Use the following commands to display and debug the Traffic Policing and 
Shaping configuration.

After the above configuration, execute the 

 command in any view to 

display the running of a certain rule or all the access rules of TP configuration, and 
to verify the effect of the configuration.

After the above configuration, execute the 

 command in any view to 

display the running of the TP configuration information and running statistic 
information on each interface, and to verify the effect of the configuration.

After the above configuration, execute the 

 command in any view to 

display the running of GTS configuration and statistics in certain interface or all 
interfaces, and to verify the effect of the configuration.

Table 1001   Setting shaping parameters for a certain kind of traffic

Set shaping parameters for a certain 
kind of traffic 

qos gts { any | acl acl-number } cir 

committed-rate [ cbs burst-size [ ebs 

excess-burst-size [ queue-length 

queue-length ] ] ]

Remove shaping for a certain kind of 
traffic

undo qos gts { any | acl acl-number }

Table 1002   Configuring LR on physical port

Set rate-restriction of physical port

qos lr cir committed-rate [ cbs 

burst-size [ ebs excess-burst-size ] ]

Remove LR on physical port

Table 1003   Displaying TP rule

Display TP rule

display qos carl [ carl-index ]

Table 1004   Displaying the TP information at each interface

Display the TP information on each 
interface

interface-type interface-number ]

Table 1005   Display GTS configuration and statistics on the interface

Display GTS configuration and 
statistics in the interface 

display qos gts interface [ 

interface-type interface-number ]