3com 3031 Instruccion De Instalación
942
C
HAPTER
67: T
RAFFIC
C
LASSIFICATION
, P
OLICING
,
AND
S
HAPING
Displaying LR
Configuration and
Statistics on Interface
After the above configuration, execute the
display
command in any view to
display the running of LR configuration and statistics in certain interface or all
interfaces, and to verify the effect of the configuration
interfaces, and to verify the effect of the configuration
Typical Example of
Traffic Policing and
Shaping
Traffic Policing and
Shaping
Configuration requirement
As shown in Figure 232, the interface ethernet0/0/0 of the router Router1 is
connected with the interface ethernet1/0/0 of the router Router2. Server, PC1 and
PC2 can access the Internet via Router1 and Router2. Server, PC1 and the
interface ethernet0/0/0 of the router Router1 are in the same network segment
while PC2 and the interface ethernet2/0/0 of the router Router1 are in the same
network segment. The traffic from Server and PC1 received by the interface
ethernet1/0/0 require to be controlled on the router Router2.
connected with the interface ethernet1/0/0 of the router Router2. Server, PC1 and
PC2 can access the Internet via Router1 and Router2. Server, PC1 and the
interface ethernet0/0/0 of the router Router1 are in the same network segment
while PC2 and the interface ethernet2/0/0 of the router Router1 are in the same
network segment. The traffic from Server and PC1 received by the interface
ethernet1/0/0 require to be controlled on the router Router2.
The traffic restriction from Server is 54000bps. The traffic less than this restriction
can be transmitted normally. When the traffic exceeds this restriction, the
preference of the ultralong packet will be set to 0 before transmission.
can be transmitted normally. When the traffic exceeds this restriction, the
preference of the ultralong packet will be set to 0 before transmission.
The traffic restriction from PC is 8000bps. The traffic less than this restriction can
be transmitted normally. When the traffic exceeds this restriction, the ultralong
packet will be dropped.
be transmitted normally. When the traffic exceeds this restriction, the ultralong
packet will be dropped.
In the meantime, there are the following requirements for the interfaces
ethernet1/0/0 and ethernet0/0/0 on the router Router2:
ethernet1/0/0 and ethernet0/0/0 on the router Router2:
■
The restriction of the total traffic received by the interface ethernet1/0/0 on
Router2 is 0.5Mbps and when the traffic exceeds this restriction, the ultralong
packet will be dropped.
Router2 is 0.5Mbps and when the traffic exceeds this restriction, the ultralong
packet will be dropped.
■
The restriction of the traffic entering the Internet via the interface
ethernet0/0/0 on Router2 is 1Mbps and when the traffic exceeds this
restriction, the ultralong packet will be dropped.
ethernet0/0/0 on Router2 is 1Mbps and when the traffic exceeds this
restriction, the ultralong packet will be dropped.
Table 1006 Displaying LR configuration and statistics in the interface
Operation
Command
Display LR configuration and
statistics in the interface
statistics in the interface
display qos lr interface [ interface-type
interface-number ]