3com 3031 Instruccion De Instalación

C

HAPTER

 68: C

ONGESTION

 M

ANAGEMENT

After the above configuration, execute 

 command in any view to display 

the running of the priority queue configuration, and to verify the effect of the 
configuration.

Customizing queueing configuration includes: 

■

Configure custom-list

■

Apply custom-group on the interface

There are 16 groups of custom-lists (1-16). Information, including the queuing 
rules of packets, the length of each queue, and the bytes to be sent continuously 
during polling of each queue, is specified for every group. Only one group can be 
used on an interface.

Packets can be classified under different protocols, and enter different queues. But 
V2.0 software can only classify IP packets by far.

Perform the following configuration in system view. 

Set an interface-based classifying rule. For the same 

, repeatedly 

using this command will add a new rule for it. 

Perform the following configuration in system view.

Designate a default queue for those packets matching no rules.

Table 1015   Displaying priority queue status and application on the interfaces

Display the status of priority queue

Display priority queue configuration 
status on the interface

interface-number ]

Table 1016   Configuring custom-list under network layer protocol

Configure custom-list under 
network layer protocol 

qos cql cql-index protocol protocol-name 

queue-key  key-value queue queue-number

Delete the relative classifying rule of 
group-number

undo qos cql cql-index protocol 

protocol-name queue-key key-value queue 

Table 1017   Configuring custom-list based on interface

Configure custom-list based on the 
coming interface of packets

qos cql cql-index inbound-interface 

interface-type interface-number queue 

Delete the relative classifying rule of 
group-number 

undo qos cql cql-index inbound-interface