3com 5012 Manual De Usuario
100
3Com Router 5000/6000 Family
Command Reference
motorola base-svc
Use the
motorola base-svc
command to configure the start SVC for voice routing on a DLCI.
DLCI view
motorola encapsulation
Use the
motorola encapsulation
command to specify an encapsulation for Motorola LCON on the DLCI.
DLCI view
motorola max-voice
Use the
motorola max-voice
command to configure the maximum number of voice channels created on a
DLCI concurrently.
DLCI view
motorola remote-id
Use the
motorola remote-id
command to configure a remote connection ID.
DLCI view
move
Use the
move
command to move a file.
User view
mpls
Use the
mpls
command in system view to enable MPLS globally and enter MPLS view.
Use the
mpls
command in interface view to enable MPLS on the interface.
Interface view
Routing Protocol view
System view
Virtual Interface view
mpls l2vc
Use the
mpls l2vc
command to create an LDP connection.
Interface view
mpls l2vpn
Use the
mpls l2vpn
command to enable L2VPN.
System view
mpls l2vpn encapsulation
Use the
mpls l2vpn encapsulation
command to create Kompella MPLS L2VPN, specify encapsulation
type, and enter MPLS L2VPN view.
System view
mpls-exp
Use the
mpls-exp
command to configure the PVC to carry packets of the specified priority levels when the
EXP identifier in the MPLS packet is used to identify the priority levels of packets.
ATM Pvc-Group view
mpls label advertise
Use the
mpls label advertise
command to specify at the egress the type of the label to be distributed to
the penultimate hop.
MPLS view
mpls ldp
Use the
mpls ldp
command to enable LDP.
System view
mpls ldp enable
Use the
mpls ldp enable
command to enable LDP on the interface.
Interface view
mpls ldp hops-count
Use the
mpls ldp hops-count
command to set the maximum hops of loop detection.
System view
mpls ldp loop-detect
Use the
mpls ldp loop-detect
command to enable loop detection.
System view
mpls ldp password
Use the
mpls ldp password
command to configure LDP authentication mode.
Interface view
Remote-Peer view