3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
101
Command Reference
mpls ldp path-vectors
Use the
mpls ldp path-vectors
command to set the maximum value of path vector.
System view
mpls ldp remote-peer
Use the
mpls ldp remote-peer
command to create a remote-peer entity and enter remote-peer view.
Remote-Peer view
System view
mpls ldp reset-session
Use the
mpls ldp reset-session
command to reset a specified session on an interface.
Interface view
mpls ldp timer
Use the
mpls ldp timer
command to set the duration of a Hello hold timer or session hold timer.
Interface view
Remote-Peer view
mpls ldp transport-ip
Use the
mpls ldp transport-ip
command to configure an LDP session transport address.
Interface view
mpls lsr-id
Use the
mpls lsr-id
command to configure an LSR ID.
System view
mpls static-l2vc
Use the
mpls static-l2vc
command to create an SVC MPLS L2VPN connection.
Interface view
msdp
Use the
msdp
command to enable MSDP and enter the MSDP view.
System view
msdp-tracert
Use the
msdp-tracert
command to trace the transmission path of SA messages in the network.
Any view
mtu
Use the
mtu
command to set the size of Maximum Transmission Unit (MTU) of the ATM interface.
Interface view
mtu
Use the
mtu
command to configure MTU of Kompella MPLS L2VPN.
MPLS L2VPN view
mtu (ATM Interface)
Use the
mtu
command to set the MTU size of the ATM interface.
Interface view
mtu (Ethernet/GE Interface)
Use the
mtu
command to set the MTU size of the Ethernet interface.
Ethernet Interface view
mtu label-including
Use the
mtu label-including
command to configure to include MPLS label length in outgoing interface
MTU calculation.
MPLS view
mtu (POS Interface)
Use the
mtu
command to set the MTU size of the POS interface.
POS Interface view
mtu (serial interface)
Use the
mtu
command to set MTU of the serial interface.
AM Interface view
AUX Interface view
Serial Interface view
mtu (Tunnel Interface)
Use the
mtu
command to set the maximum transmission unit (MTU) for Tunnel interface.
Tunnel Interface view