3com 5012 Manual De Usuario
122
3Com Router 5000/6000 Family
Command Reference
reflector cluster-id
Use the
reflector cluster-id
command to configure the cluster ID of the route reflector.
BGP Unicast view
BGP Multicast view
VPNv4 view
refresh bgp
Use the
refresh bgp
command to request the peer to retransmit routes or retransmit routes to the peer.
User view
register-enable
Use the
register-enable
command to enable or disable the SIP registration function.
SIP Client view
register lifetime
Use the
register lifetime
command to configure the registration lifetime of an MR.
MR view
register-number
Use the
register-number
command to enable the gateway (the VoIP-enabled router) to register the
number of the voice entity with the H.323 gatekeeper or SIP server.
Voice Entity view
register-policy
Use the
register-policy
command to configure a RP to filter the register packet sent by the DR in the
PIM-SM network and to accept the specific packet only.
PIM view
register retransmit
Use the
register retransmit
command to configure the registration retransmission parameters of an MR,
including the initial registration retransmission interval, the maximum registration retransmission interval,
and the maximum number of registration retransmission attempts.
and the maximum number of registration retransmission attempts.
MR view
register-value
Use the
register-value
command to configure the value of all register signals of R2 signaling.
R2 CAS view
registrar
Use the
registrar
command to configure the IP address or domain name, port number, timeout time as
well as master/slave attribute of the registration server under UAs.
SIP Client view
remark atmclp
Use the
remark atmclp
command to have the system remark the CLP bit of ATM packets in the class.
Traffic Behavior view
remark dot1p
Use the
remark dot1p
command to configure the 802.1p priority value in the VLAN packets of a class.
Traffic Behavior view
remark dsc
Use the
remark dscp
command to set a remarked DSCP value for IP packets belonging to the class.
Traffic Behavior view
remark fr-de
Use the
remark fr-de
command to set the remarked DE bit of frame relay packets.
Traffic Behavior view
remark ip-precedence
Use the
remark ip-precedence
command to configure IP precedence remark.
Traffic Behavior view
remark mpls-exp
Use the
remark mpls-exp
command to configure MPLS EXP value to identify matched packets.
Traffic Behavior view
remote-address
Use the
remote-address
command to configure IP address of the remote GW.
IKE-Peer view
remote address
Use the
remote address
command to configure to assign IP address for the peer interface.
Interface view