3com 5012 Manual De Usuario
150
3Com Router 5000/6000 Family
Command Reference
timer realtime-accounting
tUse the
timer realtime-accounting
command to configure a real-time accounting interval.
RADIUS view
timer realtime-accounting
Use the
timer realtime-accounting
command to configure a real-time accounting interval.
TACACS+ view
timer register-complete (R2)
Use the
timer register-complete
command to configure the timeout value for register signals of R2
signaling.
R2 CAS view
timer register-pulse (R2)
Use the
timer pulse
command to configure the persistence time of the register pulse signal of R2 signaling
(A3, A4 and A6, etc.).
R2 CAS view
timer response-timeout
Use the
timer response-timeout
command to configure the RADIUS server response timer.
RADIUS view
timer response-timeout
Use the
timer response-timeout
command to set the response timeout timer of the TACACS server.
TACACS+ view
timer retry
Use the
timer retry
command to configure the value of connection request re-try period.
MSDP view
timer ring (R2)
Use the
timer ring
command to configure the maximum time range before the signal tone of R2 signaling
is sent.
R2 CAS view
timer ring-back
Use the
timer ring-back
command to configure the maximum duration for the system to send the ringback
tone.
Voice Subscriber-Line view
timer spf
Use the
timer spf
command to configure the interval for the SPF calculation.
IS-IS view
timer wait
Use the
timer wait
command to set a timeout period for a probing attempt.
Detect Group view
timer wait-digit
Use the
timer wait-digit
command to configure the maximum time duration that the system waits for a
digit.
Voice Subscriber-Line view
timers
Use the
timers
command to modify value for the three timers, Period update, Timeout and
Garbage-collection, of RIP.
RIP view
timeslot-set
Use the
timeslot-set
command to configure the timeslot set to perform R2 signaling and digital E&M
signaling configurations.
CE1/PRI Interface view
timestamp
Use the
timestamp
command to enable the local end to send voice packets with timestamps.
Voice Entity view
tos
Use the
tos
command to assign a value to the ToS field in the header of HWPing test packets.
HWPing Test Group view
trace interval
Use the
trace interval
command to configure the interval for information recording in the debugging
process, that is, the number of voice packets upon the pass of which a record will be made.
Voice view