3com 5012 Manual De Usuario
152
3Com Router 5000/6000 Family
Command Reference
ttl propagate
Use the
ttl propagate
command to enable IP TTL duplication of MPLS.
MPLS view
tunnel authentication
Use the
l2tp tunnel authentication
command to enable L2TP tunnel authentication.
L2TP Group view
tunnel avp-hidden
Use the
tunnel avp-hidden
command to configure Attribute Value Pair (AVP) data to be transmitted in
hidden format.
L2TP Group view
tunnel flow-control
Use the
tunnel flow-control
command to enable L2TP tunnel flow-control.
L2TP Group view
tunnel local
Use the
tunnel local
command to set the local address of an ipsec policy.
Manually-Established IPSec Policy view
tunnel keepstanding
Use the
tunnel keepstanding
command to enable the tunnel-hold function of L2TP, preventing the tunnel
from being disconnected when no session is present.
L2TP Group view
tunnel name
Use the
tunnel name
command to specify local name of a tunnel.
L2TP Group view
tunnel-on
Use the
tunnel-on
command to enable tunnel function.
VoIP Voice Entity view
tunnel password
Use the
tunnel password
command to specify a password for tunnel authentication.
L2TP Group view
tunnel-protocol dvpn
Use the
tunnel-protocol udp dvpn
command to encapsulate a tunnel interface with UDP DVPN.
Tunnel Interface view
tunnel-protocol gre
Use the
tunnel mode
command to set encapsulation mode of the tunnel interface to GRE.
Tunnel interface view
tunnel remote
Use the
tunnel remote
command to set the remote address of an ipsec policy.
Manually-Established IPSec Policy view
tunnel timer hello
Use the
tunnel timer hello
command to set a Hello packet forwarding interval.
L2TP Group view
type
Use the
type
command to configure the analog E&M subscriber-line signal type.
Voice Subscriber-Line view
type-number
Use the
type-number
command to configure the calling/called number types of voice entities.
Voice Entity view
udp-helper enable
Use the
udp-helper enable
command to enable UDP Helper.
System view
udp-helper port
Use the
udp-helper port
command to specify the UDP port number in the UDP broadcasts to be
forwarded.
System view
udp-helper server
Use the
udp-helper server
command to configure the destination server to which the UDP broadcasts
received on the interface are forwarded.
Ethernet Interface view