3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
153
Command Reference
undelete
Use the
undelete
command to restore a file from the recycle bin.
User view
undo schedule reboot
Use the
undo schedule reboot
command to cancel the configuration of the schedule reboot terminal
service.
User view
undo synchronization
Use the
undo synchronization
command to remove the synchronization between BGP and IBGP.
BGP view
VPN Instance view
upgrade
Use the
upgrade
command to upgrade the Boot ROM program, pico-code or the logic.
System view
upgrade
Use the
upgrade
command to upgrade the Boot ROM.
User view
upgrade flash
Use the
upgrade flash
command to upgrade the software of the card. To have the upgraded software take
effect, reboot the router.
ATM (ADSL) Interface view
use encrypt-card
Use the
use encrypt-card
command to specify the SA proposal uses the encryption card at a designated
slot.
Card SA Proposal view
user
Use the
user
command to register an FTP user.
FTP Client view
user
Use the
user
command to configure username, password and corresponding display mode in SIP client
view and/or voice entity view. The configurations of the cnonce and realm authentication information fields
are optional, which can be used for authentication.
are optional, which can be used for authentication.
SIP Client view
Voice Entity view
user-interface
Use the
user-interface
command to enter single-user interface view or multi-user interface view.
System view
user-name-format
Use the
user-name-format
command to configure the format of the username to be sent to a RADIUS
server.
RADIUS view
user-name-format
Use the
user-name-format
command to configure the username format sent to the TACACS server.
TACACS+ view
user privilege
Use the
user privilege
command to configure the command level that the login users on the current user
interface can access.
User Interface view
username
Use the
username
command to configure a name used for logging onto the FTP server.
HWPing Test Group view
using (CE1/PRI Interface)
Use the
using
command to configure the operating mode of the CE1/PRI interface.
CE1/PRI Interface view
using (CE3 Interface)
Use the
using
command to configure the operating mode of a CE3 interface.
CE3 Interface view