3com 5012 Manual De Usuario
96
3Com Router 5000/6000 Family
Command Reference
lr percent
1Use the
lr percent
command to configure LR.
Traffic Behavior view
ls
Use the
ls
command to query for a specified file/directory.
FTP Client view
ls
Use the
ls
command to view the files in the specified directory as you would with the
dir
command.
SFTP Client view
lsp-trigger
Use the
lsp-trigger
command to configure topology-triggered LSP creation policy.
MPLS view
mac-address
Use the
mac-address
command to configure Mac address of virtual Ethernet interface.
Virtual Ethernet Interface view
mac-address timer aging
Use the
mac-address timer aging
command to set the aging timer for the MAC address table on the port.
Ethernet Port view
mandatory-chap
Use the
mandatory-chap
command to force LNS to perform CHAP authentication again with the client.
L2TP Group view
mandatory-lcp
Use the
mandatory-lcp
command to allow LNS and client to renegotiate Link Control Protocol (LCP)
between them.
L2TP Group view
map bridge
Use the
map bridge
command to establish the IPoEoA mapping or PPPoEoA mapping on the PVC.
PVC view
map bridge-group
Use the
map bridge-group broadcast
command to enable the PVC to transmit and receive BPDUs.
PVC view
map clns
Use the
map clns
command to create a CLNSOA mapping for a PVC.
ATM PVC view
map ip
Use the
map ip
command to create IPoA mapping for PVC.
PVC view
map ppp
Use the
map ppp
command to create a PPPoA map on the PVC.
PVC view
map routed-bridge
Use the
map routed-bridge
command to configure routed bridge encapsulation on the PVC.
ATM PVC view
match
Use the
match
command to configure a PVC group to differentiate traffic by the Precedence or DSCP
identifier in the TOS field of the IP header.
ATM Pvc-Group view
match-template
Use the
match-template
command to configure the match template for a voice entity.
Voice Entity view
max-call (in Voice Dial Program View)
Use the
max-call
command to configure max-call sets (128 sets at most).
Voice Dial Program view
max-call (in Voice Entity View)
Use the
max-call
command to bind a voice entity to the max-call set specified by set-number.
Voice Entity view