3com 5012 Manual De Usuario
3Com Router 5000/6000 Family
97
Command Reference
max-packet-process
Use the
max-packet-process
command to set the maximum number of processed packets per second on
a certain VLAN.
System view
md5-compatible
Use the
md5-compatible
command to configure ISIS to use the 3Com-compatible MD5 algorithm. You
need to use this command when MD5 authentication on ISIS is required between your router and a 3Com
device.
device.
ISIS view
mdl (CT3 Interface)
Use the
mdl
command to configure MDL message detection/sending on the CT3 interface.
CT3 Interface view
memory
Use the
memory
command to configure the safety value and lower limit of the router idle memory.
System view
memory auto-establish disable
Use the
memory auto-establish disable
command to disable the function of restoring the connections of
all the routing protocols (even if the idle memory reduces to a safety value).
Use the
memory auto-establish disable
command to disable the above function.
System view
memory auto-establish enable
Use the
memory auto-establish enable
command to resume connections of all the routing protocols when
the idle memory of the router recovers to a safety value.
Use the
memory auto-establish disable
command to disable the above function. Use the
memory
auto-establish enable
command to enable the above function again. By default, the function is always
enabled.
System view
mfc (R2 CAS)
Use the
mfc
command to maintain of MFC channel of the specified timeslot.
R2 CAS view
mfr bundle-name
Use the
mfr bundle-name
command to set frame relay bundle identification (BID).
MFR Interface view
mfr fragment
Use the
mfr fragment
command to enable FRF.16 fragmentation on the MFR bundle.
MFR Interface view
mfr fragment-size
Use the
mfr fragment-size
command to configure the maximum fragment size allowed on a frame relay
bundle link.
Frame Relay Interface view
MFR Interface view
mfr link-name
Use the
mfr link-name
command to set the frame relay bundle link identification (LID).
Frame Relay Interface view
mfr retry
Use the
mfr retry
command to set the maximum times that a frame relay bundle link can resend hello
message when waiting for a hello acknowledgement message.
Frame Relay Interface view
mfr timer ack
Use the
mfr timer ack
command to set the time of waiting for hello acknowledgment message before
frame relay bundle link resends hello message.
Frame Relay Interface view
mfr timer hello
Use the
mfr timer hello
command to set the interval for a frame relay bundle link to send hello message.
Frame Relay Interface view
mfr window-size
Use the
mfr window-size
command to configure the number of fragments that can be held by the window
used in sliding window algorithm when multilink frame relay reassembles received fragments.
MFR Interface view