3com MSR 30-20 Instruccion De Instalación
34
C
HAPTER
3: I
NSTALLATION
Figure 21 Connect the RPS cable
n
The MSR 30-11 does not support RPS.
Connecting the
Console Terminal
Console Terminal
Console port
H3C MSR 30 series provides an RS232 asynchronous serial console (CON) port for
router configuration, through which you can complete the configuration of the
router. For its attributes, refer to Table 22:
router configuration, through which you can complete the configuration of the
router. For its attributes, refer to Table 22:
n
For the MSR 30-11, the console interface and AUX interface are integrated.
Console cable
Console cable is an eight-wire shielded cable. At one end of the cable is a crimped
RJ-45 connector to the console port on the router; at the other end of the cable is
a DB-9 (female) connector to the serial port on the console terminal.
RJ-45 connector to the console port on the router; at the other end of the cable is
a DB-9 (female) connector to the serial port on the console terminal.
The following figure illustrates the console cable.
Table 22 Attributes of the console port
Attribute Description
Connector RJ-45
Interface standard
RS232
Baud rate
9600 bps (default) to 115,200 bps
9600 bps by default
Function
Connecting to the ASCII terminal
Connecting to the serial interface of the local PC and
running terminal emulation program on the PC
running terminal emulation program on the PC
Command line interface