Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Gestetner
  4. 1045
  5. Guía Del Usuario

Gestetner 1045 Guía Del Usuario

Descargar
Página de 59
Configuring Protocols
3
1
B
Configure the TCP/IP protocol with the appropriate IP address, subnet
mask and other settings.
Check with the network administrator that the settings are correct.
Configuring NetBEUI for Printing
These instructions are for configuring the Network Interface Board and Win-
dows 95/98/Me to use the NetBEUI protocol.
Configuring the machine
Configure the machine to use the NetBEUI protocol.
• Make sure that the NetBEUI protocol is set to active. (The default is active.)
Reference
For more information about how to make the above settings, see the System
Settings.
Configuring a Windows 95/98/Me computer
Install the NetBEUI protocol on the Windows 95/98/Me computer and set it as
the default protocol.
A
Open  [Control Panel] and double-click the [Network] icon. Make sure that
“NetBEUI” is listed in the [The following network components are installed:] box
on the [Configuration] tab.
Note
❒ If the NetBEUI protocol is not installed, click [Add] on the [Configuration] tab
to install it. For more information about installing the NetBEUI protocol,
see Windows 95/98/Me Help.
❒ If “NetBEUI →Dial-Up Adaptor” is listed in the [The following network com-
ponents are installed:]
 box, select it and click [Remove] to remove the binding.
B
Set the NetBEUI protocol as the default protocol. Click the [Configuration]
tab, select “NetBEUI” in the [The following network components are installed:]
box, and click [Properties].
C
Click the [Advanced] tab, select [Set this protocol to be the default protocol], and
click [OK].
D
Click [OK] to close the [Network] dialog box.
E
When the message to restart appears, click [Yes].