Gestetner 5308l Guía De Operación
Selecting Original Type
23
1
Selecting Original Type
Select one of the following three types
to match your originals:
to match your originals:
❖
❖
❖
❖ Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
pictures can be reproduced with
this mode.
❖
❖
❖
❖ Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
nals contain only letters (no pic-
tures).
❖
❖
❖
❖ Letter/Photo mode
Select this mode when your origi-
nals contain photographs or pic-
tures with letters.
nals contain photographs or pic-
tures with letters.
Note
❒ Moire patterns might occur when
screened originals are printed.
❒ When using Photo mode to print
originals with both letter and pho-
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the
{Type of
Original
} key.
A
Press the
{{{{Type of Original}}}} key to
select Photo mode.
B
Press the
{{{{Image Density}}}} key to
adjust the image density.
C
Set your originals on the exposure
glass or in the optional document
feeder.
glass or in the optional document
feeder.
D
Press the
{{{{Start}}}} key.
E
Check the image position of the
trial or proof print.
trial or proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the
{Image
Position
} keys (see
⇒
P.8 “Shift-
ing The Print Image Position For-
ward Or Backward”) or the side
table fine adjusting dial (see
ward Or Backward”) or the side
table fine adjusting dial (see
⇒
P.8 “Shifting The Print Image Po-
sition To The Right Or Left”).
sition To The Right Or Left”).
F
Make your prints.
TSLS01EN
TSLS016N
TSLS012N