Gestetner dsm616 Guía De La Red
Connecting the Network Cable to the Network
10
2
Connecting to the Ethernet
Interface
Interface
The network interface board supports
10BASE-T or 100BASE-TX connec-
tions.
10BASE-T or 100BASE-TX connec-
tions.
AAAA
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See “Turning On the Pow-
er”, Copy Reference.
er”, Copy Reference.
BBBB
Loop the network interface cable
and attach the ferrite core.
and attach the ferrite core.
Note
❒ The network interface cable
loop should be about 15 cm
(6”)(
(6”)(
A) from the end of the ca-
ble (closest end to the printer).
The ferrite core at the end of the
cable should be a ring type.
The ferrite core at the end of the
cable should be a ring type.
CCCC
Connect the Ethernet interface ca-
ble to the 10BASE-T/100BASE-TX
port.
ble to the 10BASE-T/100BASE-TX
port.
DDDD
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
operating. Turns off when 10 BASE-T
is operating.
AAW026S1
AAW023S1
AAW022S1
1.
2.