Gestetner dsm616 Guía De La Red

Connecting the Network Cable to the Network

Confirming the Connection

AAAA

Make sure the LED of the IEEE
802.11b card is lit.

❖

❖ When using in infrastructure mode

If it is connected properly to the

network, the LED is green when in
infrastructure mode. If the LED is
blinking, the machine is searching
for devices.

If [LAN Type] on the [Interface Set-

tings]

/[Network] screen is not set to

[IEEE 802.11b]

, it does not light, even

if the main power is on.

❖

❖ When using in ad hoc mode/802.11

ad hoc mode

If it is connected properly to the

network, the LED is green when in
ad hoc mode or 802.11 ad hoc mode.
If the LED is blinking, the machine
is searching for devices. The LED
will light after a few seconds.

If the IEEE 802.11b card is work-

ing, it is lit in orange.

BBBB

Print the configuration page to
verify settings.

Reference

For more information about
printing a configuration page,
see Printer Reference 2.

Checking the machine's radio wave
status

When using in infrastructure mode,
you can check the machine's radio
wave status using the control panel.

Note

❒ To check the radio wave status, se-

lect [IEEE 802.11b] under [LAN Type]
on the [Network] screen.

AAAA

Press the

{{{{User Tools/Counter}}}} key.

BBBB

Select [System Settings] using

{{{{U

U}}}}

{{{{T

T}}}}, and then press the {{{{OK}}}}

key.

CCCC

Select [Interface Settings] using

{{{{U

U}}}}

{{{{T

T}}}}, and then press the {{{{OK}}}}

key.

DDDD

Select [IEEE 802.11b] using

{{{{U

U}}}} or

{{{{T

T}}}}, and then press the {{{{OK}}}} key.

EEEE

Select [Wireless LAN Signal] using

{{{{U

U}}}} or {{{{T

T}}}}, and then press the

{{{{OK}}}} key.

The machine's radio wave status
appears.

FFFF

After checking the radio wave sta-
tus, press the

{{{{User Tools/Counter}}}}

key.

AAW027S1

1
2

AAW027S1

1
2