Gestetner dsm725e Guía De La Red

Monitoring and Configuring the Printer

❖ Adding IP Routing Table

msh> route add {host|net} “destination” “gateway”

• Adds a host or network route to “destination”, and a gateway address to

“gateway” in the table.

• Specify the IP address to destination and gateway.
• Host becomes the default setting.

❖ Setting the Default IP Gateway

msh> route add default “gateway”

❖ Deleting specified IP destination from Routing Table

msh> route delete {host|net} “destination”

• Host becomes the default setting.
• IP address of destination can be specified.

❖ Route initialization

msh> route flush

Note

❒ The maximum number of routing tables is 16.
❒ Set a gateway address when communicating with devices on an external net-

work.

❒ The same gateway address is shared by all interfaces.

set

Use the “set” command to set the protocol information display “active” or “in-
active”.

❖ View settings

The following command displays protocol information (active/inactive).

msh> set tcpip

msh> set appletalk

msh> set netware

msh> set smb

msh> set protocol

• When protocol is specified, information about TCP/IP, AppleTalk, Net-

ware, SCSI print, and SMB appears.

msh> set ftp

msh> set rsh

msh> set diprint

msh> set web

msh> set snmp