Gestetner f104 Manual Suplementario
Using IP-Fax Functions
100
5
Transmitting by Specifying a
VoIP Gateway
VoIP Gateway
This section describes how to send fax
messages through your network to
ordinary G3 fax machines connected
to the public telephone lines via a
VoIP gateway.
messages through your network to
ordinary G3 fax machines connected
to the public telephone lines via a
VoIP gateway.
AAAA
Set the original, and then select
the scan settings as necessary.
the scan settings as necessary.
BBBB
Press the user function key (
{{{{F1}}}}
to
{{{{F10}}}}) assigned to the Internet
FAX function.
The display for entering an ad-
dress appears.
dress appears.
Note
❒ On Type 2 machines, the Inter-
net FAX function is pre-as-
signed to the
signed to the
{{{{F5}}}} key.
❒ Use the following to specify an
IP address or host name with-
out pressing the user function
key:
• Quick Dial, Speed Dial or
out pressing the user function
key:
• Quick Dial, Speed Dial or
Group Dial assigned to the
destination IP address
destination IP address
• The Redial function
Reference
Chapter 2 "Dialing", Basic Fea-
tures
Chapter 3 "Redial", Advanced
Features
Chapter 2 "Dialing", Basic Fea-
tures
Chapter 3 "Redial", Advanced
Features
If the Network Transmission Auto
Check Function Is Turned Off
Check Function Is Turned Off
If the Network Transmission Auto
Check function is set to "Off" with
user parameters, select "IP-Fax Ad-
dress" in the display that appears.
For information about changing
this setting, see p.166 “User Pa-
rameters” (switch 32, bit 1).
A Press 0
Check function is set to "Off" with
user parameters, select "IP-Fax Ad-
dress" in the display that appears.
For information about changing
this setting, see p.166 “User Pa-
rameters” (switch 32, bit 1).
A Press 0
0
0
0 or 1
1
1
1 key to display "2.
IP-Fax Address".
B Press the {{{{OK}}}} key.
CCCC
Enter the G3 fax number of the re-
ceiver using the number keys,
and then press the
ceiver using the number keys,
and then press the
{{{{OK}}}} key.
When the Network Transmission
Auto Check Function is set to On:
Auto Check Function is set to On:
When the Network Transmission
Auto Check Function is set to Off:
Auto Check Function is set to Off:
DDDD
Press the
0
0
0
0 or 1
1
1
1 key to display
"2. IP-Fax Address".
Note
❒ If the Network Transmission
Auto Check function is turned
off, the display does not appear.
Proceed to step
off, the display does not appear.
Proceed to step
. See p.166
“User Parameters” (switch 32,
bit 1).
bit 1).
ZHMS170E