Gestetner f104 Manual Suplementario
Before Using Network Functions
25
2
Before Using Network Functions
Before using network functions, you
need to connect the machine to a
LAN, and assign necessary functions
to the user function keys.
need to connect the machine to a
LAN, and assign necessary functions
to the user function keys.
Connecting to a LAN
NIC FAX uses TCP/IP protocol to
communicate over a LAN, and must
b e c o n n e c t e d t o t h e L A N w i t h
10BASE-T or 100BASE-TX LAN ca-
ble.
communicate over a LAN, and must
b e c o n n e c t e d t o t h e L A N w i t h
10BASE-T or 100BASE-TX LAN ca-
ble.
❖
❖
❖
❖ 10BASE-T
10BASE-T refers to a twisted pair
IEEE802.3 (Ethernet) cable that
supports LAN communication at
10 Mbps. Use cables of category 3,
4 or 5 to connect to the machine.
IEEE802.3 (Ethernet) cable that
supports LAN communication at
10 Mbps. Use cables of category 3,
4 or 5 to connect to the machine.
❖
❖
❖
❖ 100BASE-TX
100BASE-TX refers to a twisted
pair IEEE802.3u (Ethernet) cable
that supports LAN communica-
tion at 100 Mbps. Use cables of cat-
egory 5 to connect to the machine.
pair IEEE802.3u (Ethernet) cable
that supports LAN communica-
tion at 100 Mbps. Use cables of cat-
egory 5 to connect to the machine.
Note
❒ A LAN cable is not supplied with
NIC FAX.
AAAA
Attach the ferrite core.
Loop the cable and attach the fer-
rite core as shown.
Loop the cable and attach the fer-
rite core as shown.
Note
❒ The LAN cable loop should be
about 5.1 cm (2 inches) (L) from
the end.
the end.
BBBB
Connect the cable to the LAN port
on the rear of NIC FAX.
on the rear of NIC FAX.
CCCC
Plug the other end of the cable
into a hub.
into a hub.
L
ZHMP120
ZHMH360E