Gestetner f540 Guía De Operación
Maintaining Your Machine
176
9
Changing the Paper Size
Changing the Paper Size in the
Main Paper Tray
Main Paper Tray
The following example explains how
to switch to A4 size paper. To switch
to other paper sizes, follow the same
steps but move the end plate and side
rails to the appropriate size mark on
the tray.
to switch to A4 size paper. To switch
to other paper sizes, follow the same
steps but move the end plate and side
rails to the appropriate size mark on
the tray.
Important
❒ Make sure that copying or printing
of received fax messages is not in
progress.
progress.
Note
❒ You can load up to 250 sheets of
copy paper in the main paper tray.
❒ For information about the size and
orientation of copy paper that you
can load in the paper tray, see
p.200 “Paper”
can load in the paper tray, see
p.200 “Paper”
AAAA
Pull out the paper tray until it stops.
Note
❒ Remove any remaining paper.
BBBB
Remove the back fence.
CCCC
While pressing the release lever,
adjust the side fences to the de-
sired paper size.
adjust the side fences to the de-
sired paper size.
DDDD
Set the back fence to the desired
paper size.
paper size.
Note
❒ When you load A4L paper,
place the back fence in the cor-
ner pocket on the left.
ner pocket on the left.
ZFOY630E
ZHMH370E
StellaF25_EN_Combine_F_pre_FM.book Page 176 Thursday, August 26, 2004 8:45 PM