Gestetner f540 Manual Suplementario
Before Using Network Functions
25
2
Before Using Network Functions
Before using network functions, you
need to connect the machine to a
LAN, and assign necessary functions
to the user function keys.
need to connect the machine to a
LAN, and assign necessary functions
to the user function keys.
Connecting to a LAN
NIC FAX uses TCP/IP protocol to
communicate over a LAN, and must
b e c o n n e c t e d t o t h e L A N w i t h
10BASE-T or 100BASE-TX LAN ca-
ble.
communicate over a LAN, and must
b e c o n n e c t e d t o t h e L A N w i t h
10BASE-T or 100BASE-TX LAN ca-
ble.
❖
❖
❖
❖ 10BASE-T
10BASE-T refers to a twisted pair
IEEE802.3 (Ethernet) cable that
supports LAN communication at
10 Mbps. Use cables of category 3,
4 or 5 to connect to the machine.
IEEE802.3 (Ethernet) cable that
supports LAN communication at
10 Mbps. Use cables of category 3,
4 or 5 to connect to the machine.
❖
❖
❖
❖ 100BASE-TX
100BASE-TX refers to a twisted
pair IEEE802.3u (Ethernet) cable
that supports LAN communica-
tion at 100 Mbps. Use cables of cat-
egory 5 to connect to the machine.
pair IEEE802.3u (Ethernet) cable
that supports LAN communica-
tion at 100 Mbps. Use cables of cat-
egory 5 to connect to the machine.
Note
❒ A LAN cable is not supplied with
NIC FAX.
AAAA
Attach the ferrite core.
Loop the cable and attach the fer-
rite core as shown.
Loop the cable and attach the fer-
rite core as shown.
Note
❒ The LAN cable loop should be
about 5.1 cm (2 inches) (L) from
the end.
the end.
BBBB
Connect the cable to the LAN port
on the rear of NIC FAX.
on the rear of NIC FAX.
CCCC
Plug the other end of the cable
into a hub.
into a hub.
Assigning User Function Keys
Assign necessary functions to the
user function keys in advance.
user function keys in advance.
❖
❖
❖
❖ Auto Mail Reception
Press the user function key as-
signed to the Auto Mail Reception
function to turn this feature on or
off. When the Auto Mail Reception
i n d i c a to r is l it , t h e s e rv er is
checked periodically for e-mail,
and downloading takes place as
necessary. When not lit, e-mail is
not received automatically. It is
recommended to assign the Auto
Mail Reception function to a user
function key if you frequently
switch the function. See p.88 “Auto
Mail Reception”.
signed to the Auto Mail Reception
function to turn this feature on or
off. When the Auto Mail Reception
i n d i c a to r is l it , t h e s e rv er is
checked periodically for e-mail,
and downloading takes place as
necessary. When not lit, e-mail is
not received automatically. It is
recommended to assign the Auto
Mail Reception function to a user
function key if you frequently
switch the function. See p.88 “Auto
Mail Reception”.
L
ZHMP120
ZHMH360E