Gestetner f540 Manual Suplementario
Transmitting IP-Fax
103
5
Note
❒ If you do not want to specify
other destination, proceed to
step
step
.
KKKK
Press the
{{{{Start}}}} key.
The IP-Fax transmission begins.
Transmitting by Specifying an
Alias Fax Number
Alias Fax Number
This section describes how to send fax
messages by specifying an alias fax
number of a destination stored in the
gatekeeper.
messages by specifying an alias fax
number of a destination stored in the
gatekeeper.
Preparation
You need to set the gatekeeper ad-
dress as well as alias fax number
beforehand with IP-Fax Parameter
settings. See p.44 “IP-Fax Parame-
ter Settings”.
Also, you need to make settings for
using the gatekeeper for IP-Fax
transmission with user parame-
ters. For information about making
these settings, see p.166 “User Pa-
rameters” (switch 32, bit 0).
You need to set the gatekeeper ad-
dress as well as alias fax number
beforehand with IP-Fax Parameter
settings. See p.44 “IP-Fax Parame-
ter Settings”.
Also, you need to make settings for
using the gatekeeper for IP-Fax
transmission with user parame-
ters. For information about making
these settings, see p.166 “User Pa-
rameters” (switch 32, bit 0).
Note
❒ Alias fax numbers are fax numbers
stored in the gatekeeper and valid
only within the network.
only within the network.
❒ If you change the settings for using
or not using the gatekeeper, you
need to program the destinations
for the Quick Dial or Speed Dial
again. Normal IP-Fax transmission
is not possible without performing
this procedure.
need to program the destinations
for the Quick Dial or Speed Dial
again. Normal IP-Fax transmission
is not possible without performing
this procedure.
AAAA
Set the original, and then select
the scan settings as necessary.
the scan settings as necessary.
BBBB
Press the user function key (
{{{{F1}}}}
to
{{{{F10}}}}) assigned to the Internet
FAX function.
The display for entering an ad-
dress appears.
dress appears.
Note
❒ On Type 2 machines, the Inter-
net FAX function is pre-as-
signed to the
signed to the
{{{{F5}}}} key.
❒ Use the following to specify an
alias fax number without press-
ing the user function key:
• Quick Dial, Speed Dial or
ing the user function key:
• Quick Dial, Speed Dial or
Group Dial, assigned to the
destination IP address
destination IP address
• The Redial function
Reference
Chapter 2 "Dialing", Basic Fea-
tures
Chapter 3 "Redial", Advanced
Features
Chapter 2 "Dialing", Basic Fea-
tures
Chapter 3 "Redial", Advanced
Features
If the Network Transmission Auto
Check Function Is Turned Off
Check Function Is Turned Off
If the Network Transmission Auto
Check function is set to "Off" with
user parameters, select "IP-Fax Ad-
dress" in the display that appears.
For information about changing
this setting, see p.166 “User Pa-
rameters” (switch 32, bit 1).
Check function is set to "Off" with
user parameters, select "IP-Fax Ad-
dress" in the display that appears.
For information about changing
this setting, see p.166 “User Pa-
rameters” (switch 32, bit 1).
ZHMS170E