Preh mc12t3 Guía Del Usuario
13
OSD TURN OFF TIME
With this menu point it can be adjusted for how long the menu is to be shown on the
screen after last pressing the OSD button.
screen after last pressing the OSD button.
3.4
Mechanical Adjustment of the LCD Position
At the bracketry version the LCD position can not be changed directly an the
touchscreen/TFT monitor. The adjustment (tilting or swinging) of the touchscreen/TFT
monitor depends on your used pole or wall mount hardware.
touchscreen/TFT monitor. The adjustment (tilting or swinging) of the touchscreen/TFT
monitor depends on your used pole or wall mount hardware.
The LCD of the Preh Touch Commander is swinging and tiltable. According to the
usage the LCD position can be changed.
The right picture shows the model with the modular foot.
usage the LCD position can be changed.
The right picture shows the model with the modular foot.
Pict. 17: setting screws on rear side
The infinitely variable adjustment of the tilting strength is carried out with two setting
screws fixed on the rear wall of the monitor. The pulling strength (1-3 Nm)should be
about the same on both screws.
screws fixed on the rear wall of the monitor. The pulling strength (1-3 Nm)should be
about the same on both screws.
Pict. 18: setting screws below