Lanzar sts65bt Guía Del Usuario
OPERATION
16
Reset function
There is a reset button on the front
panel, It must be activated with either
a ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
1. Initial installation of the unit when all
panel, It must be activated with either
a ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
1. Initial installation of the unit when all
wiring is completed.
2. All the function buttons do not work.
3. Error symbol on the display.
3. Error symbol on the display.
Volume level adjustment
Press VOL^/v buttons on the front panel
(except Main Menu mode) or VOL+/-
buttons on the remote control to adjust
the value of the volume. The volume
value can be changed from 0 to 63.
When you adjust the volume the
followed information will be displayed
on the screen:
(except Main Menu mode) or VOL+/-
buttons on the remote control to adjust
the value of the volume. The volume
value can be changed from 0 to 63.
When you adjust the volume the
followed information will be displayed
on the screen:
Press MUTE button on the remote
control or tap
icon on the screen
will mute the sound. Press the button
or tap
again will resume the sound.
Brake function
If the brake wire wasn’t connected to
the ground (when driving, in BRAKE
OFF), Only the audio would be heard.
the picture would not be shown on the
screen in DVD/AV mode for safety
purpose, and the following picture will
appear.
the ground (when driving, in BRAKE
OFF), Only the audio would be heard.
the picture would not be shown on the
screen in DVD/AV mode for safety
purpose, and the following picture will
appear.
Smart mode function
1) In Radio mode, every press S-M button
on the remote control or tap
icon on the screen will enter smart
mode, and switch the rear speaker’s
mode to AV and DVD mode.
icon on the screen will enter smart
mode, and switch the rear speaker’s
mode to AV and DVD mode.
Picture adjustment
Press PIC button on the remote control
will enter PICTURE menu like followed:
will enter PICTURE menu like followed:
Use
/
buttons on the remote control
to select the BRIGHT, COLOR,
CONTRAST and TINT items, then use
CONTRAST and TINT items, then use
/
buttons to adjust the
corresponding value, all the value can
be adjusted from 0 to 30.
Note:
1) Only the AV mode is PAL, TINT item
be adjusted from 0 to 30.
Note:
1) Only the AV mode is PAL, TINT item
can be displayed and adjusted.
2) In DVD mode, only BRIGHT and
CONTRAST items can be displayed
and adjusted.
and adjusted.