Lanzar sts65bt Guia Do Utilizador

16

There is a reset button on the front
panel, It must be activated with either
a ballpoint pen or thin metal object. The
reset button is to be activated for the
following reasons:
1. Initial installation of the unit  when all

wiring is completed.

2. All the function buttons do not work.
3. Error symbol on the display.

Press VOL^/v buttons on the front panel
(except Main Menu mode) or VOL+/-
buttons on the remote control to adjust
the value of the volume. The volume
value can be changed from 0 to 63.
When you adjust the volume the
followed information will be displayed
on the screen:

Press MUTE button on the remote

control or tap 

 icon on the  screen

will mute the sound. Press the button

or tap 

 again  will resume the sound.

If the brake wire wasn’t connected to
the ground (when driving, in BRAKE
OFF), Only the audio would be heard.
the picture would not be shown on the
screen in DVD/AV mode for safety
purpose, and the following picture will
appear.

1) In Radio mode, every press S-M  button

on the remote control or tap 
icon on the screen will enter  smart
mode, and switch the rear  speaker’s
mode to AV and DVD mode.

Press PIC button on the remote control
will enter PICTURE menu like followed:

Use 

 / 

 buttons on the remote control

to select the BRIGHT, COLOR,
CONTRAST and TINT items, then use
 

 / 

 buttons to adjust the

corresponding value, all the value  can
be adjusted from 0 to 30.
Note:
1) Only the AV mode is PAL, TINT item

can be displayed and adjusted.

2) In DVD mode, only BRIGHT and

CONTRAST items can be displayed
and adjusted.