ONKYO TX-NR901 Manual De Instrucciónes
87
Zone 2
—Continued
The section explains how to turn on, select an input
source, and adjust the volume for Zone 2.
source, and adjust the volume for Zone 2.
Note:
To control Zone 2 with the remote controller, you must
first press its [ZONE 2] button, and then press the next
button within five seconds (i.e., while the TX-NR901’s
STANDBY indicator is flashing).
first press its [ZONE 2] button, and then press the next
button within five seconds (i.e., while the TX-NR901’s
STANDBY indicator is flashing).
Notes:
• If the Sleep function has been set, any Zone 2 compo-
nent will turn off along with the TX-NR901 when the
specified sleep time expires. To use the Sleep function
with Zone 2 only, set the Sleep function and then set
the TX-NR901 to Standby.
specified sleep time expires. To use the Sleep function
with Zone 2 only, set the Sleep function and then set
the TX-NR901 to Standby.
• Only analog input sources are output by the PRE OUT
SURR BACK/ZONE 2 outputs and the SURR BACK/
ZONE 2 SPEAKERS terminals. Digital input sources
are not output. If no sound is heard when an input
source is selected, check if it’s connected to analog
inputs.
ZONE 2 SPEAKERS terminals. Digital input sources
are not output. If no sound is heard when an input
source is selected, check if it’s connected to analog
inputs.
• Since the Zone 2 function and the REC OUT outputs
use the same circuitry, if the [REC OUT] button is
pressed, Zone 2 will be turned off.
pressed, Zone 2 will be turned off.
• When the SURR BACK/ZONE 2 outputs (SPEAK-
ERS/PRE OUT) are set to Zone 2 (page 86), listening
modes that need surround back speakers (i.e., Dolby
Digital EX, DTS-ES, and THX Surround EX) are not
available.
modes that need surround back speakers (i.e., Dolby
Digital EX, DTS-ES, and THX Surround EX) are not
available.
• While Zone 2 is active,
functions will not work.
• While Zone 2 is active, the Pure Audio listening mode
cannot be selected for the main room.
• You can’t select different radio bands for Zone 2 and
the main room. For example, if you select FM for the
main room, then FM will also be selected for Zone 2.
main room, then FM will also be selected for Zone 2.
Controlling Zone 2
1
Point the remote controller at the
TX-NR901 and press the
[ZONE 2] button followed by the
[ON] button.
TX-NR901 and press the
[ZONE 2] button followed by the
[ON] button.
This activates Zone 2 and, if connected
to the TX-NR901’s 12V TRIGGER
OUT, turns on the Zone 2 amp.
to the TX-NR901’s 12V TRIGGER
OUT, turns on the Zone 2 amp.
To do this on the TX-NR901,
press the [ZONE 2] button.
press the [ZONE 2] button.
2
To select the Zone 2 input source
with the remote controller, press
the [ZONE 2] button and then roll
the scroll wheel.
with the remote controller, press
the [ZONE 2] button and then roll
the scroll wheel.
The name of the selected Zone 2 source
appears on the display.
appears on the display.
To do this on the TX-NR901,
press the [ZONE 2] button, and
then press an input selector but-
ton within eight seconds.
press the [ZONE 2] button, and
then press an input selector but-
ton within eight seconds.
If you select AM or FM, you can use
the remote controller’s [CH/DISC] but-
ton to select the presets.
the remote controller’s [CH/DISC] but-
ton to select the presets.
--/---
@. - ' /
ABC
DEF
PQRS
TUV
WXYZ
DIRECT TUNING
GHI
JKL
MNO
CAPS
DELETE
LANGUAGE LOCATION
ALBUM
AR TIST
GENRE
PLAYLIST
CUSTOM
DISPLAY
DIMMER
T V
INPUT
INPUT
SLEEP
RANDOM
REC
STEP / SLOW
MUTING
ENTER
LAST M
ANGLE
SUBTITLE
AUDIO
MEMORY
SEARCH
A-B
REPEAT
ON
STANDBY
TV
TV CH
TV VOL
AUDIO
AD
J
EXIT
GU
ID
E
+10
0
CLEAR
1
2
3
4
5
6
7
8
9
INPUT
TO
P M
ENU
MEN
U
SET
UP
RE
TURN
ZONE
2
INPUT
MODE
MACRO
VOL
CH
DISC
TEST TONE
CH SEL
PURE A
SURR
DIRECT
STEREO
Re-EQ
THX
All ST
LEVEL+
LEVEL-
L NIGHT
AUDIO SEL
DSP
DSP
+
-
+
-
1
2
1, 2, 3, 4
4
3
ZONE
2
ON
ZONE
2
To set the main room and Zone 2
sources simultaneously, press the
[ZONE 2] button repeatedly until “Z2
Sel: SOURCE” appears on the display.
Now use the scroll wheel or input selec-
tor buttons to select the source.
sources simultaneously, press the
[ZONE 2] button repeatedly until “Z2
Sel: SOURCE” appears on the display.
Now use the scroll wheel or input selec-
tor buttons to select the source.
3
To adjust the Zone 2 volume with
the remote controller, press the
[ZONE 2] button, and then use
the LEVEL [+]/[–] buttons.
the remote controller, press the
[ZONE 2] button, and then use
the LEVEL [+]/[–] buttons.
To do this on the TX-NR901, use
the ZONE 2 LEVEL [
the ZONE 2 LEVEL [
] [
] but-
tons.
If your Zone 2 receiver/integrated amp
is connected to the TX-NR901’s
AUDIO ZONE 2 OUT L/R outputs, use
the volume control on the receiver/inte-
grated amp.
is connected to the TX-NR901’s
AUDIO ZONE 2 OUT L/R outputs, use
the volume control on the receiver/inte-
grated amp.
4
To turn off Zone 2 with the
remote controller, press the
[ZONE 2] button followed by the
[STANDBY] button.
remote controller, press the
[ZONE 2] button followed by the
[STANDBY] button.
To do this from the TX-NR901,
press the [ZONE 2] button, and
then press the [OFF] button
within eight seconds.
press the [ZONE 2] button, and
then press the [OFF] button
within eight seconds.
ZONE
2
LEVEL+
LEVEL-
ZONE
2
STANDBY
TX-NR901_En.book Page 87 Wednesday, October 1, 2003 9:44 AM