Samsung CLP-650 Guía Del Usuario

Solving Problems

7.16

Press 
Continue Button

The printer is waiting 
for the user’s action 

before printing from 
the Multi-purpose Tray 
using the manual feed 

mode.

Load a sheet of print material 
and press the On Line/

Continue button. You need to 
press the button for each page.

Ready [Color]
Low Toner

The corresponding 
toner cartridge in your 
printer is low on toner.

Redistribute the toner in the 
corresponding toner cartridge, 
referring to page 6.2.

Ready

IP Conflict

The IP address of the 

printer conflicts with 
other devices on the 
network.

Contact your network 

administrator and choose an 
address within your subnet 
which will not conflict with any 

other devices.

Rear Fan Error

A problem has 
occurred in the Rear 
Fan of the printer.

Unplug the power cord and 
plug it in again. If the problem 
persists, call for service.

Replace [Color]

Toner

The corresponding 

toner cartridge in your 
printer is nearly 
empty. However, the 

printer continues 
printing, even though 
print quality is not 

optimal. When the 
‘[Color] Toner Empty’ 
message appears, the 

printer will stop 
printing.

If necessary, replace the 

corresponding toner cartridge 
with a new one. See page 6.4.

Replace Fuser

The life span of the 
fuser unit has expired.

Replace the fuser unit with a 
new one. See page 6.7.

Replace Fuser 

Soon

The life span of the 

fuser unit will expire 
soon.

When “Replace Fuser” appears 

on the display, replace the 
fuser unit.

Replace MP
Pick-roller

The life span of the MP 
pickup roller has 

expired.

Contact a service 
representative.

Replace
Transfer Belt

The life span of the 
paper transfer belt has 
expired and the 

printer will stop 
printing until a new 
paper transfer belt is 

placed into the printer.

Replace the paper transfer belt 
with a new one. See page 6.5.

Replace 
Transfer 
Belt Soon

The life span of the 
paper transfer belt will 
expire soon.

When the “Replace Transfer 
Belt” message appears, the 
printer will stop printing. 

Replace the paper transfer belt.

: Refer to the Microsoft Windows 98SE/Me/NT 4.0/2000/

2003/XP User’s Guide that came with your PC for further 
information on Windows error messages.

Replace Tray1
Pick-roller

The life span of the 
Tray1 pickup roller has 

expired.

Contact a service 
representative.

Replace Tray2
Pick-roller

The life span of the 
Tray2 pickup roller has 
expired.

Contact a service 
representative.

SMPS Fan Error

A problem has 

occurred in the SMPS 
Fan of the printer.

Unplug the power cord and 

plug it in again. If the problem 
persists, call for service.

Tray2 Error

The optional Tray2 is 
not properly installed 

or connected to the 
printer.

After turn the printer off and 
then back on, reinstall the 

optional Tray2. If the message 
persists, contact a service 
representative.

Tray2 Jam 

Cover Open

The optional Tray2 jam 

cover is open.

Close the Tray2 cover firmly.

“File in Use” message 
appears during 
installation.

Exit all software applications. Remove all software 
from the StartUp Group, then restart Windows. 
Reinstall the printer driver.

“Error Writing to LPTx” 

message appears.

• Ensure that all cables are connected correctly 

and the printer is on.

• If bi-directional communication is not turned on 

in the driver, it will also cause this message.

“General Protection 

Fault”, “Exception OE”, 
“Spool32”, or “Illegal 
Operation” messages 

appear.

Close all other applications, reboot Windows and 

try printing again.

“Fail To Print”, “A printer 
timeout error occurred.” 
messages appear.

These messages may appear during printing. Just 
keep waiting until the printer finishes printing. If 
the message appears in standby mode or after 

printing has been completed, check the 
connection and/or whether an error has occurred.